6. ON VEHICLE PROCEDURE A. DRIVE SHAFT (LH / RH) REMOVAL (PETORL VEHICLE) 1. Position the vehicle properly on the two-post lift. 2. Lift the vehicle on using two-post lift and remove the front wheels LH & RH. 3. Drain the Transaxle oil through Drain Plug. 4. Remove earthing cable from gear box. 5. Remove stub axle ball joint Mounting & Loosen Lower Control Arm on LH & RH side. 6. Remove driveshaft lock nut LH& RH. 7. Remove ball joint (steering rack) from steering knuckle from both sides. 8. Remove vertical link mountings on suspension rod for both RH & LH sides. DRIVESHAFT MT_AMT 10
RkJQdWJsaXNoZXIy MTIwNTUz