FLYWHEEL LEARNING PROCEDURE 1. Start the vehicle and keep the vehicle in idle. 2. Rev up the engine rpm from idle to 4000 rpm and leave the acc. Pedal so that engine will come to idle. Repeat the same procedure for 5 times. 3. One important condition for flywheel learning is Engine coolant temperature should be above 60°C. 4. DTC is set & CEL Lamp Blinks, when flywheel learning is not done. NOTE While replacing ECU or target wheel the • flywheel learning is essential. Petrol Engine Ph-2 (CAFÉ) 175
RkJQdWJsaXNoZXIy MTIwNTUz