ECU - ON VEHICLE REMOVAL, INSPECTION AND RE-FITMENT PROCEDURE REMOVAL 1. Disconnect the negative (-) cable and then the positive (+) cable from the engine. 2. Remove the protection cap and pull out the lock of the ECU coupler. 3. Disconnect the electrical connection of the ECU. 4. Remove battery. 5. Remove the Mounting screws of the ECU. INSPECTION Check whether any pins are damaged / bent. RE-FITMENT PROCEDURE 1. Place ECU in proper position. 2. Tighten the mounting screws of the ECU. 3. Connect the Earth connection of the ECU. 4. Connect the coupler of the ECU. 5. Pull the coupler to check proper fitment. 6. Connect the battery negative terminal. CAUTION Ensure proper alignment of the ECU and • harness coupler. Petrol Engine Ph-2 (CAFÉ) 174
RkJQdWJsaXNoZXIy MTIwNTUz