6. Pull out instrument cluster hood. 7. Remove Cluster Cover Assy. (Two M4.8x16 screws at top, two rib-locks at bottom & snaps on either sides) Remove instrument cluster. (For procedure refer instrument cluster removal process in Electrical section.) 8. Remove music system (If applicable). (For procedure refer music system removal process in Electrical section). 9.Remove floor console assembly. (For procedure refer floor console removal process). Pull out end cover LH side. 10. Remove electrical connections of Start stop 11. switch, remove two more screws at Glove Box area of Mid Panel & Pull out dashboard mid panel. Remove lower side & outboard side screws on 12. glove box assembly and pull out glove box. Remove PAB Assembly (If applicable). (For 13. procedure refer PAB removal process in SRS section). Remove ‘A’ pillar Lower trim. (For procedure 14. refer ‘A’ pillar trim removal process.) BODY 13
RkJQdWJsaXNoZXIy MTIwNTUz