C. INCAR SENSOR Incar sensor is a sensor that measures the average passenger cabin ambient temperature. D. EVAPORATOR SENSOR It is a temperature-sensing device, which is positioned at the coldest point of the evaporator (as shown in the fig below). The control unit switches OFF the compressor at a temperature when condensed water tends to form ice on the fins of evaporator. Thus, it maintains the evaporator temperature within a specified range. LOCATION It is mounted on Air intake / Evaporator housing assembly. PIN OUT PIN DETAILS E. ACTUATORS i. MODE ACTUATOR The actuator operates this flap in order to control the airflow direction from the FATC unit. E.g., Face, Foot, Defrost etc. NOTE fitment can be done of the incar sensor since • it’s a part of the control panel. PIN NO DESCRIPTION 01 Temperature out to control panel 02 Ground NOTE Evaporator sensor removal and installation • process from On Vehicle repairs in HVAC. NOTE actuators used to operate the doors are • similar and can be interchanged. FATC 24
RkJQdWJsaXNoZXIy MTIwNTUz