REMOVAL OF PAD 1. Keep the gear shifter lever in neutral position. 2. Apply the parking brake. 3. Jack the vehicle and remove the rear wheel. 4. Loosen and remove the bottom sliding pin bolt. 5. Swing caliper as shown in figure. 6. Remove brake pads. ASSEMBLY: Follow reverse procedure to assemble brake pads. REMOVAL OF CARRIER 1. Remove brake pads from carrier assembly. 2. Remove Brake Caliper Assembly. 3. Remove bolts from knuckle to remove carrier. 4. Remove boot guide rods, guide rod A and guide rod B. 5. Remove pad spring. BRAKE_PETROL 39
RkJQdWJsaXNoZXIy MTIwNTUz