9. Unstake and unscrew drive shaft nut and take out the thrust washer. Remove the caliper housing from the knuckle 10. & hang it using tool. Unscrew the disc holding screws and remove 11. the disc. Unscrew the sensor mounting screw and 12. remove the sensor (if applicable) Remove ball joint of lower arm from the 13. Knuckle. Disconnect Wheel Speed Sensor connection. 14. Remove strut mounting bottom bolts from the 15. knuckle assembly by supporting the drive shaft. SUSPENSION_DIESEL 27
RkJQdWJsaXNoZXIy MTIwNTUz