1.2L REVOTRON TWIN CYLINDER CNG ENGINE 143 10.Tilt the radiator inwards and down the radiator and condenser assembly from the grommet on the top mounts, both LH and RH simultaneously. 11.After removing the radiator and condenser assembly out, separate the condenser from the radiator, by removing fasteners. FITMENT For fitment follow the reverse order of removal. Tighten the following fasteners to the recommended torque. RADIATOR FAN SHROUD REMOVAL 1. Drain the coolant and remove the Coolant tank. (For procedure refer “Coolant Replacement” in Engine maintenance section) 2. Disconnect the electrical connections to the radiator fan. 3. Remove the two fasteners to separate fan shroud. 4. Lift out the shroud from engine bay. FITMENT For fitment slide the shroud into the mounts till it snaps at the top mounts.
RkJQdWJsaXNoZXIy MTIwNTUz