1.2L REVOTRON TWIN CYLINDER CNG ENGINE 142 RADIATOR REMOVAL 1. Drain the coolant and remove the Coolant tank. (For procedure refer “Coolant Tank Removal in section). 2. Disconnect the radiator top hose at radiator end by removing spring band clamp. 3. Remove the bracket and spring band clamp of bottom hose at the thermostat end. 4. Discharge the refrigerant using standard recovering equipment. 5. Loosen and remove the bolt and disconnect the refrigerant inlet pipe to condenser. 6. Loosen and remove the bolt and disconnect the refrigerant outlet pipe to condenser. CAUTION Never leave the condenser lines open immediately cover them with caps, otherwise the desiccant which is in-built in the condenser may absorb the moisture from surrounding air and get contaminated 7. Remove front bumper. 8. Loosen and remove the splash guard fasteners 9. Loosen and remove the fasteners of radiator bottom mounting member.
RkJQdWJsaXNoZXIy MTIwNTUz