Do not re-use Teflon tape removed from 26. cylinder valve again Cut-off excess tape and draw free end of the 27. tape and press firmly at the overlay point. 28. Put the stem protection cap / cylinder neck ”ORing” on the valve thread. Place the valve thread into the cylinder neck 29. manually and screw it in clock-wise direction till hand tight. Hold the cylinder in a suitable fixture, Standard 30. wheel chock may be use for this application. NOTE Make sure that tape does not overhang the first threads it may block passage / small orifices in the valve. 1.2L REVOTRON CNG PHASE-2 ENGINE 153
RkJQdWJsaXNoZXIy MTIwNTUz