Take out the cylinder. 18. Hold the cylinder in a suitable fixture. 19. Remove the cylinder valve from the cylinder 20. using a torque wrench & special tightening tool (Part No: 5442 5890 47 01). Ensure that the moon valve threads are free 21. from burrs, Teflon tape and any irregularities. Replace the moon valve with new one in case 22. moon valve is faulty. Remove the stem protection cap / cylinder 23. neck ”O-Ring” from the valve thread. Ensure that the Cylinder threads are free from 24. burrs, Teflon tape and any irregularities. NOTE Please note that an empty cylinder weighs • about 34kg each and due care must be taken when lifting the cylinders so as not to cause injury. Ensure that the cylinder valves do not • touch/strike anywhere during the removal of the cylinder to avoid damage to the valves. WARNING Extreme Caution must be taken when attempting to remove the cylinder valve from the cylinder. 1.2L REVOTRON CNG PHASE-2 ENGINE 150
RkJQdWJsaXNoZXIy MTIwNTUz