3. Disconnect the gas HP pipe. 4. Relieve the radiator coolant pressure by slowly opening the radiator cap. 5. Disconnect both inlet and outlet hoses from the regulator. 6. Remove the mounting bolts and take out the regulator wit bracket. 7. Remove the Regulator from bracket by removing mounting bolts. FITMENT For fitment follow removal procedure in reverse. Conduct leak detection test after. • Top up the Coolant and do de-aeration. • CAUTION There may be residual pressure in the high pressure line which could get relieved during this operation. CAUTION Plug the hoses suitably to avoid contamination from dust. 1.2L REVOTRON CNG PHASE-2 ENGINE 144
RkJQdWJsaXNoZXIy MTIwNTUz