1.2L REVOTRON ENGINE 23 17. Connect the vacuum hose connected between brake booster to intake maniflod. 18. Connect all the hoses connected between radiator and engine. 19. Connect the fuel lines to the engine. 20. Install the Battery Plate, Battery and ECU. 21. Connect the engine wiring harness connection with ECU. 22. Add the appropriate quantity of Engine oil, Transaxle oil and coolant with respective systems. 23. Connect the battery positive cable and then the battery negative cable. 24. Crank the engine several times without allowing the vehicle to start. This allows the oil and coolant to flow through engine. 25. Start the engine and verify the oil pressure light on the instrument cluster goes out. Stop the engine immediately if the light fails to extinguish. 26. Allow the engine to run for several minutes, checking for fluid levels and leakage. B. AIR FILTER ASSEMBLY REMOVAL 1. Remove the air filter mounting bolt and clamp. 2. Remove air filter hose to throttle valve. FITMENT For fitment follow the removal procedure in reverse.
RkJQdWJsaXNoZXIy MTIwNTUz