Disconnect the clutch cable connection from 24. the transaxle. Remove front two tyres. 25. Disconnect the left and right drive shafts from 26. the vehicle. Use suitable belt/chain to fix a zip crane to the 27. engine lifting hooks located at front and rear of the engine. Raise the crane slightly up until very light 28. pressure is applied to the engine. Remove the nuts on Engine ‘B’ mounting 29. bracket. Remove the “A”- mounting bracket nuts (3 nos) 30. from engine side. Remove the “C” mount. 31. Now move the two post lift upwards and place 32. the support stand, under the engine. (Use a suitable wooden block or other support for additional height as necessary.) Now slightly lower the lift until engine and 33. transaxle assembly is securely placed / fix on the support stand. Disconnect the lifting crane from the engine. 34. Now carefully move the lift up. 35. SPECIAL TOOL Engine Support stand -: 5424 5890 24 01 CAUTION Use care when raising the vehicle off the engine and transaxle assembly. Verify all components and electrical connections are disconnected prior to raising the vehicle, or vehicle damage occur. ENGINE 1.2L BSVI PHASE-2 89
RkJQdWJsaXNoZXIy MTIwNTUz