Tighten the fasteners as per given sequence. 6. Assemble the lower ITG Bearing Cap with 7. locating dowels. Ensure the NRV (Non return valve) in place inside lower ITG. Place the camshafts to their respective location 8. in such way that the cam lobes of first cylinder are opposite to each other as shown. Assemble the ITG Bearing Cap Upper. 9. Assemble the Cylinder Head cam cap bolts 10. along with the washers, starting from the ends of the cylinder head and working inwards to the center. (Keep the arrow of cap in outward direction.) Refer the loosening sequence. 11. NOTE Cam lobes should not be pressing any valves. ENGINE 1.2L BSVI PHASE-2 140
RkJQdWJsaXNoZXIy MTIwNTUz