Lock the flywheel. 16. Assemble flywheel by tightening mounting 17. bolts. FITMENT OF PISTON AND CONNECTING II. ROD SUB-ASSEMBLIES Starting with oil rings, install the taper faced 1. rings and top rings using ring expander as per illustrated in fig. Ensure the top mark on the top ring should be 2. on top facing piston crown. Using ring expander, assemble piston rings. 3. Place the bearing shells of connecting rod 4. assembly. Lubricate the gudgeon pin and small end before 5. assembly. Place the gudgeon pin to the small end of 6. connecting rod to assemble connecting rod in piston assembly. Assemble gudgeon pin from the small end of 7. connecting rod. Assemble connecting rod. 8. SPECIAL TOOL Flywheel locking Tool in Standalone condition 2702 5890 06 04 CAUTION The piston ring gap should not be inline with each other while assembling on piston. Place the piston rings on the piston, such that the ring gaps are 1200 apart. SR NO DESCRIPTION 1 Oil Ring 2 Taper Faced Ring 3 Top Ring ENGINE 1.2L BSVI PHASE-2 135
RkJQdWJsaXNoZXIy MTIwNTUz