SUSPENSION 31 14. ON BENCH REMOVAL AND ASSEMBLY OF WHEEL HUB (GEN3 BEARING) 1. It requires specific care for bolt tightening sequence and torque value. 2. Sequences of bolt tightening of inner flange of Gen3 Bearing into the knuckle carried out as described in view E. 3. Tightening torque value of 2-3 Kg-m is applied to bolts in sequence of 1-3-2-4. 4. Final tightening torque value (Torque: 7.65±0.5 Kg-m & Angle: 30˚±3˚) must be applied with same sequence. 5. Bolt tightening sequence must be followed to avoid abnormal residual face deformation of Gen3 bearing. NOTE: Do not reuse Gen3 Bearing mounting bolts. Apply thread adhesive on bolt prior to assembly. 15. REMOVAL OF SUBFRAME ASSEMBLY 1. Remove the front wheel. 2. Remove the mounting bolts and take out the engine guard underbody. 3. Disconnect the anti-roll bar joint from ARB link.
RkJQdWJsaXNoZXIy MTIwNTUz