DRIVESHAFT_CNG 7 10. Remove Mounting on Wheel speed sensor and disconnect it. 11. Drain the Transaxle oil from Drain plug & collect Transaxle oil in a suitable container. 12. Pull out Knuckle Assembly and Swing out both drive shafts from transaxle and place it suitably alongside. 13. Do not pull drive shaft excessively as the plunge joint will come out of housing and damage the boot Pry. Plunge joint housing for taking out joint out of splines. Do not place the CV drive shaft on rough / uncleaned surfaces. This might damage the drive shaft boot. FITMENT: For fitment follow the reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz