DRIVESHAFT_CNG 6 8. ON VEHICLE REMOVAL OF DRIVE SHAFT (LH & RH SIDE) 1. Position the vehicle properly on the two post lift and loosen the front wheel nuts. 2. Disconnect Battery –VE terminal. 3. Remove Front Wheels. 4. Remove Front Mud Liner on LH side. 5. Apply Brake & Loosen Drive shaft Lock Nut. 6. Remove Tie Rod. 7. Remove Suspension Mtg. vertical link (antiroll bar) from Strut on LH & RH side. 8. Remove ball joint (steering rack) from steering knuckle from RH & LH sides. 9. Remove stub axle ball joint Mtg. & Remove Lower Control Arm (LCA) on LH & RH side.
RkJQdWJsaXNoZXIy MTIwNTUz