ELECTRICAL 89 Smart Key is used as a passive key for Passive Entry and Passive Start operation. The Smart Key is same RKE remote (with all its existing applications) having additional capability of receiving LF Signal and transmitting RF signal required for passive access to the vehicle. The Smart Key permits or denies the passive access to the vehicle based on the received RSSI and security validation. Passive key facilitates the user to access the vehicle without actively using the key fob ensuring comfort and security. Smart Key consist of 4 buttons namely lock, unlock, tailgate unlock and approach lamp button. 1. Vehicle Unlock Operation When Vehicle is in locked condition and user presses unlock button on Smart Key, all doors gets unlocked. After successful unlock, flasher indication comes ON once. 2. Vehicle Lock Operation When vehicle is in unlocked condition and all doors are closed and user presses the lock button on Smart Key, Vehicle gets centrally locked. After successful lock, flasher indication comes ON twice. After unsuccessful lock, reverse unlock happens in case of driver door ajar condition and slam lock happens in case of other door ajar condition with mis-lock sound. 3. Approach Light Operation Approach light ON operation: When vehicle is in OFF mode (ACC, IGN and Crank are OFF) and user presses the Approach Light button on Smart Key, Approach lights (Low beam, position lamps and roof lamp) turns ON. Approach light OFF operation: When user presses the Approach Light button again if approach lamps are ON OR Approach lamp timer elapses Approach Light turns OFF. 4. Tailgate Release Operation When vehicle is lock and vehicle power mode is OFF If tailgate switch is pressed within 30 second after RKE tailgate command, tailgate gets unlock independent of smart key. When vehicle is unlock If first RKE tailgate unlock is pressed and then vehicle ignores RKE tailgate unlock command. NOTE Tailgate cannot be locked using tailgate button on Smart Key. If smart key battery is low/drained or vehicle battery is low/drained, user can unlock and enter into vehicle by using mechanical key blade. Present inside the smart key. Refer ‘Starting and Driving’ section for more information. Key blade in / out Slide the knob (1) to unlatch the key. Pull the key blade (2) out. Smart Key Features Vehicle search ln vehicle locked condition if lock button on remote key is pressed the turn indicators of vehicle flashes 4 times. Automatic activation of immobilizer If smart key will not found within the passenger compartment, engine will be immobilized and vehicle cannot be start. Auto locking / unlocking of doors / auto relock ln case of PEPS variants, door will get unlocked when ignition is OFF by pressing Start Stop switch. Anti-grab / anti-scan coding The remote control set of this security system is protected against the use of devices called
RkJQdWJsaXNoZXIy MTIwNTUz