FATC 16 The display will no longer show the climate control option when panel is OFF. viii. AUTO ON SELECTION BUTTON In the AUTO mode all the configurable parameters will be selected automatically except temperature selection To put the automatic climate control in fully automatic mode: a. Set the desired temperature by turning temperature control knob. b. Press the ‘AUTO’ button. c. The system automatically selects the proper mix of conditioned and/or heated air that will, as quickly as possible, raise or lowers the interior temperature to your preference. d. When you set the temperature to its lower limit (Lo) or its upper limit (Hi), the system runs at full cooling or heating only. It does not regulate the interior temperature. NOTE: In 'AUTO' mode, the FATC system will regulate the blower speed automatically. ix. TEMPERATURE CONTROL KNOB Turning the temperature control knob clockwise increases the temperature of the air. Steps of 0.5 º C. will increase the desired temperature. User can select temperature range from 18ºC to 30ºC. Whereas the anti-clockwise direction decreases. The desired temperature selected by the user shall be updated in the display simultaneously as per the rotation of the knob. When you set the temperature to its lower limit (Lo) or its upper limit (Hi), the system performs to provide full cooling or heating respectively. It does not regulate the interior temperature
RkJQdWJsaXNoZXIy MTIwNTUz