STEERING 13 3. INTERMEADIATE SHAFT REMOVAL 1. Loosen the universal joint bolt between steering column & intermediate shaft. M/S BOSCH M/S MANDO 2. Remove the universal joint bolt between intermediate shaft and rack & pinion assembly. M/S BOSCH M/S MANDO 3. Disengage the intermediate shaft from rack & pinion assembly and take out the intermediate shaft. REFITMENT: For assembly follow reverse procedure of removal. NOTE: Do not reuse the universal joint bolts. Check & confirm the fitment torque as per mention in the torque chart for respective intermediate shaft manufacturer. To differentiate both I-Shaft use below identifications: Inner and outer tube position. Dust cap cover present in M/s. Mando make I-Shaft.
RkJQdWJsaXNoZXIy MTIwNTUz