STEERING 11 C. ON VEHICLE REPAIRS 1. STEERING WHEEL REMOVAL 1. Park the car with front wheel in straight ahead position. Apply parking brake and place wheel chokes at rear wheels. 2. Disconnect battery. 3. Insert screw driver into hole and press to unlock the DAB assembly. 4. Pull out the DAB assembly (In case of Airbag version refer DAB removal procedure in SRS section). WARNING Before removing steering wheel make alignment marks on the steering wheel and the shaft for guiding during reinstallation. 5. Remove the steering wheel nut. Remove steering wheel using steering wheel puller. (Part No. 8855TOOL0001) ! CAUTION Care should be taken such that self-cancellation lugs do not get damaged (self-cancellation lugs are shown in below figure with arrows). INSPECTION: Check for any damage to self-cancellation lugs, if found, replace complete steering wheel INSTALLATION: 1. Align the marks made on the steering wheel and the shaft. Install steering wheel on steering shaft 2. Tighten the steering wheel nut to the specified torque. Tightening torque (Steering wheel nut) = 4Kg-m 3. Fit horn pad (Press fit type). 4. Connect battery.
RkJQdWJsaXNoZXIy MTIwNTUz