1.2L REVOTRON ENGINE 139 8. Use Special Tool to compress and assemble the valve spring lock halves. 9. Assemble the RFF along with Hydraulic Lash Adjuster from the cylinder head as shown in below figure. NOTE To avoid damage to valve tips, do not rotate the camshaft. 10. Repeat the procedure for exhaust port, noting the locations and components for each valve for proper reassembly. CAUTION When assembling the camshaft, use care to avoid damaging the bearing surfaces of the cylinder head and the camshaft. IV. Assembly of Cylinder Head 1. Place the cylinder head on the table. 2. Mount the cylinder head gasket over the block with locating dowel. 3. Assemble the cylinder head on the block. NOTE Match the gasket profile to Cylinder block surface as shown in figure..
RkJQdWJsaXNoZXIy MTIwNTUz