SUPPLEMENTARY RESTRAINT SYSTEM (SRS)_AB12 12 LOCATION Front Impact sensors are mounted on vertical members of front end module on the both side i.e. RH & LH. CONNECTOR PINOUTS PIN NO. PIN DESCRIPTION 1 SIGNAL 2 GROUND SUPPLY VOLTAGE LEVEL Minimum 5.25 V Nominal 6.20 V Maximum 16.5 V ON VEHICLE SERVICE REMOVAL 1. Open Bonnet. 2. Remove the battery connection. 3. Remove headlamp. (For removal refer Electrical section) 4. Disconnect the electrical connection from the front impact sensor. 5. Loosen and remove the mounting flange bolt and take out the front impact sensor from the vehicle. FITMENT For fitment, follow reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz