15 AIR BAGS SRS Fig.13 To horn contact To dab Clock Spring Adaptor plate Combi Switch Connection from w/h (Air Bag system) for DAB Connection from combi switch for horn 9. PROCEDURE FOR INSTALLATION AND REMOVAL OF COMBI-SWITCH, ADAPTOR PLATE & CLOCK SPRING. Installation : l Mount adaptor plate separately on the Combiswitch by snap fitting. l Mount the Combi-switch alongwith adaptor plate on the steering column. l Ensure proper fitment of Combi-Switch on the steering column. l Tighten the screw of Combi-switch. l Mount the clock spring on the Combi-switch by proper engagement with striker bush of Combiswitch. Fig. 12 Ensure three legs of clock spring are properly aligned with three threaded bush of adaptor plate. l Tighten three screws for proper fixing of clock spring with adaptor plate. Fig. 13 l Ensure that transport tape seal of clock spring is intact. l Connect for DAB and horn connection to the clock spring. Fig. 14 l Fit the nacelle and ensure that nacelle is sitting central around the clock spring. Fig. 15 l Install the steering wheel and ensure that DAB connector as well as horn contact wire are properly passed through the bush located in the base plate of steering wheel. Fig. 12 Combi-switch, adaptor plate & clock spring. Fig.14 Fig.15
RkJQdWJsaXNoZXIy MTIwNTUz