24 BODY 4. REMOVAL/INSTALLATION OF TAIL GATE INNER TRIMS (Fig. 3) REMOVAL l Open the tail gate. l Remove 2 mounting screws of door pull and remove grab handle. l Remove the inner handle cover by removing the screw. l Pull out trim middle, trim top, trim LH, trim RH and trim lower, for removing lower trim remove four speaker mounting screws. INSTALLATION l Replace the trim clips. l Locate trim lower on door, ensuring proper alignment of trim clips in the mounting holes on door. Press the trim on door properly. (10 trim clips on trim lower, 4 trim clips on trim middle, 4 trim clips on trim top, 3 trim clips on trim RH, 3 trim clips on trim LH) l Similarly fit the trim LH and trim RH, trim top and trip middle. l Fit the door pull using 2 csk screws (M6x16) and bright washers (6.4) and tighten the screws. l Fit the inner handle cover by tightening the pan hd. screw (M6x16). Fig. 3. 1. DOOR PULL 2. TRIM MIDDLE 3. TRIMTOP 4. TRIM LH 5. TRIMRH 6. TRIM LOWER 1 2 3 4 5 6
RkJQdWJsaXNoZXIy MTIwNTUz