23 BODY 3. REMOVAL/INSTALLATION OF FRONT/REAR DOOR INNERTRIM (Fig. 1 & 2) REMOVAL Note : Disconnect battery before doing repair work on the body. l Open the door. l Remove 2 mounting screws of door pull and remove the door pull. l Remove themounting screw of inner handle cover and door pull. Remove the cover and door pull. l Remove the decorative caps at the top 1 No. for front and 2 No. for rear door and remove 3 mounting screws viz. 1 at side and 2 at bottom for front door. (3 at side and 2 at bottom for rear door trim) l Pull out the door trim halfway and disconnect power window switch connector, speaker connector and cour tesy lamp connector. Disconnect mirror switch connector for driver door. l Remove the trim. INSTALLATION l Replace the trim fixing clips. l Locate the trim on the door. l Connect courtesy lamp connector and power window switch connector to speaker connector wiring harness. Connect mirror switch connector for driver door. l Ensure that 7 trim clips are properly located in mounting holes for front door (6 trim clips for rear door). l Press the trim on the door properly. l Fit the (door pull) using 2 sl. ch. screws and tighten the screws. l Fit the cover of inner door handle with cr pan hd screw M6x16. l Fix decorative caps. (1 for Front & 2 for Rear Door Trim) Fig. 1 - Front Door Fig. 2 - Rear Door 1 2 3 1. INNER HANDLE COVER 2. DOOR PULL 3. DOOR INNER TRIM 1 2 1. INNER HANDLE COVER 2. DOOR PULL 3. DOOR INNER TRIM 3
RkJQdWJsaXNoZXIy MTIwNTUz