22 4 DLT ENGINE Depress roller by using drive square pt. no. 2654 5890 05 10. Refer figure 24. Remove timing belt. Remove - Overflow hose from 1st injector to fuel injection pump. - Coolant pipe. - High pressure injection pipe from injectors to fuel injection pump. - Fuel pipe from fuel filter to fuel injection pump. - Fuel return pipe from fuel injection pump to fuel tank. - FICD unit. - Oil separator and hoses. - Thermostat assy. and Water Valve for cab heating (if fitted). Disconnect engine stop solenoid and cold start unit electrical cable from fuel injection pump. Hold fuel injection pump gear with spanner, 2654 5890 05 01 and unscrew mounting nut to remove fuel injection pump gear. Refer figure 25. Remove timing bolts and FIP gear. Remove woodruff key. Remove fuel injection pump rear mounting bolt and taper nut, along with split sleeve. Unscrew and remove fuel injection pump front mounting nuts. Remove fuel injection pump. Remove FIP mounting bracket. Remove starter motor assembly. Refer figure 26. Fig. 24 Fig. 25 Fig. 26
RkJQdWJsaXNoZXIy MTIwNTUz