49 FRONT AXLE - 4 X 4 7. The clip doesn't need to be removed for normal servicing. However, if damaged, remove it using thumbnail force only to avoid stretching or distorting it. Donot remove thebrakeband for normal servicing. 8. Remove the large snap ring from the outer clutch housing. 9. Remove the steel inner cage (21) by pressing it over the tang of the outer cage (20) (in the window). Lift the inner cage straight out don't tilt it. 10. Remove the plastic outer cage by prying one lug out of the large groove in the outer clutch housing. Hold the lug and go on to the next one. It is easiest to start with the lugs opposite the one that fits into the win dow of the steel inner cage. 11. Invert the entire hub and slide the cam & follower assembly out of the outer clutch housing. 4.2 Inspection Examine the protective end cap (2) for cracks, O - ring (3) Brake band (24) for damage or distortion. Also, inspect the teeth on the cam follower, clutch gear and outer clutch housing for wear or damage. Not all components are replaceable separately. Refer Page No. 52 for list of serviceable parts. 26 24 20 21 9 14 1 2 3 Fig. 7 Fig. 8 Fig. 9
RkJQdWJsaXNoZXIy MTIwNTUz