48 FRONT AXLE - 4 X 4 4. AUTOMATIC LOCKING HUB 4.1 DIS-ASSEMBLY 1. Remove the end cap and bearing race spring (4). Re move the bearing inner race and retainer (5).Note the position of the components for correct assembly. 2. Remove 6 nos. bolts of auto locking hub. 3. And pull out the hub assembly. 4. To make disassembly easier, install hub assembly on the stand, so that the entire assembly can be positioned vertically. 5. Remove the snap ring (27) with suitable plier. Exercise cautionwhen removing the snap ring. 6. Remove the drag sleeve, with brake band (26).To lift out the drag sleeve , rotate it slightly to release the brake band tangs fromthe sleeves and tilt it upon the side opposite the tangs. 5 6 9 2 4 26 27 9 Fig. 5 Fig. 6
RkJQdWJsaXNoZXIy MTIwNTUz