14 FRONT AXLE - 4 X 4 Make sure that the free - running hub is installed correctly by pushing it lightly by hand. If there is some clearance between wheel hub and free - running hub housing, reinstall it. Fig.6 After free - running hub is installed correctly, tighten bolts to specified torque. After installation, set knobs on both sides to Auto, then release hub from Lock position by moving loaded wheels forward and backward when drive shafts are stationery. Fig. 7 The reason for above maneuver is that the difference in the lock and free position from other side which might cause differential carrier gear noise. Fig. 6 Fig. 7 LOCK AUTO AUTO LOCK LOCK LOCK AUTO AUTO
RkJQdWJsaXNoZXIy MTIwNTUz