13 FRONT AXLE - 4 X 4 REMOVAL & INSTALLATION OF FREE RUNNING HUB ON VEHICLE (IF FITTED) Removal : Set the knob to "Lock" Fig. 3 Remove free - running hub main body assembly after removing fixing bolts. Remove spindle washer and brake set after removing snap ring from drive shaft. Fig. 4 Note : The drive shaft wi l l become free after removing the snap ring. Take care to support it suitably. Fig. 3 Fig. 4 Fig. 5 Installation : Install brake set to spindle. Install snap ring to minimize drive shaft axial end play. Fig. 4 Note : Allowable drive shaft axial end play to 0.2 mm or less. Confirm the knob to lock position. Install free - running hub main body assembly after aligning position of release plate and wire brake so that the end portion of wire brake does not overlap protruded portion of release plate. Fig. 5 LOCK AUTO LOCK
RkJQdWJsaXNoZXIy MTIwNTUz