ELECTRICAL 200 8.14 15. SWITCH FUNCTIONS: 8.14 15.1 Switches location: 8.14 15.2 Multifunctional LCD, Odometer, Dimmer and Trip meter (A and B), Digital clock, ambient temperature: LCD has two line displays. The first line displays the Odometer count. The second line displays either of Trip meter A, Trip meter B, Dimmer and Intensity level of panel illumination, Ambient temperature and Digital clock display. The selection and control of functions are done through 'MODE' and 'SET' push buttons (knobs) provided on either side of the LCD. The 'MODE' knob is used to select one of Trip meter A, Trip meter B, Ambient temperature, Digital clock display and Intensity level of panel illumination. Odometer and Trip meter (on LCD): The odometer record the total distance the vehicle has been driven. The trip meter can be used to measure the distance traveled on each trip or between fuel fillings. Keep track of the odometer reading and follow the maintenance schedule regularly for meeting service requirements. Ambient Temperature: Ambient Temperature is measured and displayed in the units °C or °F, which you can select by pressing the mode and set switch. You can select required function on LCD by using MODE and SET knobs available on cluster, as indicated in the table below. NOTE: Please note that each knob has to be pressed and released to change the function.
RkJQdWJsaXNoZXIy MTIwNTUz