ELECTRICAL 199 ELECTRICAL 8.14 10. SPEEDOMETER GAUGE DETAILS: This indicates the instantaneous vehicle speed in km/h to the driver for permitting a safe drive. The speedometer range is ‘0’ km/h – ‘200’ km/h. Speedometer indication (kmph): Actual speed km / hr 20 40 60 80 100 120 140 160 180 200 Min. 20 40 60 80 100 120 140 160 180 200 Indication Tolerance (km / hr) Max. 23 45 65 85 105 126 147 168 189 210 Frequency (Hz) ratio 1:1.17 26 52 78 104 130 156 182 208 234 260 Frequency (Hz) ratio 1:0.812 18.04 36.06 54.13 72.17 90.22 108.26 126.31 144.35 162.40 174.44 Frequency (Hz) ratio 1:0.90 20 40 60 80 100 120 140 160 180 200 8.14 11. TACHOMETER GAUGE DETAILS: This indicates the instantaneous engine speed in revolutions per minute (rpm) to the driver for permitting an economical and safe drive. For better economy, drive the vehicle in the Green zone of the Tachometer. Avoid Driving in the Red zone of Tachometer to protect the engine from damages. Indication RPM 500 1000 2000 3000 4000 5000 6000 Indication Tolerance (RPM) ±90 ±90 ±90 ±90 ±132 ±132 ±132 Frequency (Hz) 126 252 504 756 1008 1260 1512 8.14 12. FUEL GAUGE DETAILS: The fuel gauge indicates the amount of fuel remaining in the fuel tank to the driver for permitting a safe drive. Running the vehicle at very low fuel condition may damage the engine, so avoid driving in very low fuel condition. Very low fuel condition will be indicated by the Red zone in Fuel gauge. 8.14 13. TEMPERATURE GAUE DETAILS: This indicates the instantaneous engine coolant temperature to the driver for permitting a safe drive. Running the vehicle at very hot condition may damage the engine, so avoid driving in very hot condition. When the Temperature gauge pointer is at Red zone and Coolant Temperature Warning Lamp is blinking with continuous buzzer, stop the vehicle and check the engine cooling system. 8.14 14. OUTSIDE AMBIENT TEMPERATURE BRIEF: Outside Ambient Temperature can be seen with °C or °F unit, which can be selected by user by using “DIC and Trip” switches (Ref. Switch functions in section 15). The displayed “Outside Ambient Temperature" value may not be accurate when Vehicle speed is ≤ 30 km/h due to engine heat, exhaust from surrounding vehicles and heat reflection from road. The Instrument Cluster delays the Outside Ambient Temperature display update until it reaches the correct outside temperature. This may take several minutes.
RkJQdWJsaXNoZXIy MTIwNTUz