ELECTRICAL 101 ELECTRICAL 8.10.6 BONNET SWITCH FUNCTION: Bonnet switch is switched on or off in response to opening and closing of bonnet. LOCATION: It is fitted on Assembly Panel w/house outer RH. REMOVAL: 1.Open the bonnet and disconnect the electrical connection of bonnet switch. 2.Remove one mounting screw of bonnet switch and take out the switch along with bracket. INSPECTION: Test the switch with a Multimeter. Clip the probe of the multimeter to switch terminal and check the continuity. CONDITION SPECIFIED Not Pushed(ON) Continuity Pushed(OFF) No continuity If not as per specified condition, then replace the switch. REFITMENT: 1.Fit the bonnet switch on the bracket. 2.Tighten one mounting screw. Tightening toque for screws – 0.95 Kgm 3.Connect the electrical connection to the bonnet switch.
RkJQdWJsaXNoZXIy MTIwNTUz