ELECTRICAL 24 3.7 Protection Cap Assembly: Place the protection cap on the rectifier tighten the hexagonal nuts and the screw. 3.8 Pulley and pulley Protective cap Assembly: Insert the over running pulley in to the rotor shaft, use the assembly tool as described in point 1.2. Hold the alternator pulley by hand or with a pulley holder, using the serration tool overrunning alternator pulley can be screwed into the alternator shaft. Protective cap can be assembled using by hand pressing on to the pulley. NOTE: It is not permitted to operate the over running alternator pulley without protective cap. REFITTMENT: 1.Locate the alternator on its mounting bracket and fit the three mounting bolts with specified tightening torque. 2.Fit the Alternator belt. 3.Connect the electrical connection.
RkJQdWJsaXNoZXIy MTIwNTUz