ELECTRICAL 23 ELECTRICAL 3.4 SREC assembly with DEF: Align the marks previously made and insert the stator winding into the drive end flange. Align the marks and fit the slip ring end cover on the stator winding in such way that six stator winding leads pass through appropriate holes on the slip ring end cover. Tighten the screw. 3.5 Rectifier Assembly: Fit the rectifier on the slip ring end shield ensuring that the six ends of the stator winding pass through the appropriate plating sleeves of the rectifier. Solder the six stator winding ends on to the rectifier at the specific points. Fasten the rectifier on the slip ring end shield with two screws. 3.6 Regulator assembly: Install the voltage regulator on the slip ring end shield by carefully inserting the carbon brushes through the opening of the fitting ring. Tighten the screws. Connect the rectifier and the regulator using the screws.
RkJQdWJsaXNoZXIy MTIwNTUz