Rear Axle 23 PATTERN INTERPRETATION (RING GEAR) FACE HOBBING DRIVE SIDE HELL TOE CONDITION COAST SIDE TOE HELL CONDITION ACTION REQUIRED Desirable pattern. The pattern should be centered on the tooth. There should be some clearance between the pattern and the top of the tooth. Desirable pattern. The coast pattern should be centered on the tooth, but may be slightly toward the toe. There should be some durance between the pattern and the top of the tooth None Top toe contact Top heel contacts Backlash correct. Thicker pinion position shim required Root heel contact Root toe contact Backlash correct. Thinner pinion position shim required Top heel contact Top toe contact Pinion position shim, correct. Decrease backlash. Root toe contact Root heel contact Pinion position shim correct. Increase backlash. 4.0 DIS-ASSEMBLY & REASSEMBLY OF LIMITED SLIP DIFFERENTIAL (TRAC-LOK) 4.1 DIS-ASSEMBLY OF TRAC-LOK DIFFERENTIAL Refer section 3 point 3.2 to separate Ring Gear from Differential case. Refer section 3 point 3.3 to remove pin roll & diff shaft from Differential case. Removal of Differential Gear
RkJQdWJsaXNoZXIy MTIwNTUz