FRONT AXLE (4X2) 13 FRONT AXLE (4X2) 4.5.1.3.4 HUB BEARING REPLACEMENT REMOVAL Remove the bearing from the hub assembly using the special tools as shown in the below arrangement. 1. Place the hub assembly on the support (2) (Part No. 287058903318) NOTE First align the hub assembly on the support (2) (Part No. 287058903318) by ensuring the grooves of the support are matching with that of hub assembly. 2. Then press the drift (1) (Part No. 287058903317) for removing the bearing (3) from the hub assembly. NOTE Discard the removed bearing and use the new one for assembly. INSTALLATION Install the new bearing in the hub by using the same special tool used for removal in addition of another installer ring (2) as shown in the below arrangement. 1. Place the hub assembly on the support (3) (Part No. 287058903318). NOTE For fitment rotate the support (3) (Part No. 287058903318) upside down and place the hub assembly on the same in the opposite direction of removal as shown in the figure above. 2. Place the bearing on the hub assembly. 3. Place the installer ring (2) (Part No. 287058903319) on the bearing. 4. Place the drift (1) (Part No. 287058903317) as shown in the figure. 5. Press the drift to install the bearing in the hub assembly.
RkJQdWJsaXNoZXIy MTIwNTUz