FRONT AXLE (4X2) 12 4.5.1.3.3 TONER RING REPLACEMENT NOTE Wheel hub and brake disc assembly already removed from the stub axle.. REMOVAL 1. Remove the toner ring using special tool (2870 5890 33 01) as shown in below arrangement. a. Place the bush support (5) on the hub. b. Place the holding jaws (1) such that they hold the toner ring. c. Mount the plate on the holding jaws and tighten the two hex bolts (2). Make sure that the bush support (5) is resting on the hub and not on the toner ring (4). d. Now slowly rotate the hex screw (3) using a spanner. The tool will come off along with the toner ring. e. Remove the puller and take out the toner ring. INSTALLATION 1. Use drift (Part no. 2870 5890 33 02) to fix the toner ring on wheel hub as shown below.
RkJQdWJsaXNoZXIy MTIwNTUz