FRONTAXLE (4X4) 36 25.Remove indicator and master differential bearings. 26.Install side bearing on differential assembly using installer (Part No.270458903325) and place bearing cup along with selected shim pack in between side bearing and carrier assembly. 27.Repeat this procedure for installation of shims / bearing cone on opposite side of differential case. 28.Install spreader (Part No.287058903303) and dial indicator. Spread the carrier. Do not spread it over 0.58 mm. 29.Remove dial indicator. Install differential case assembly into carrier with the help of mallet. Ensure differential case shim (Spacer bearing preload is behind the bearing cap) !!WARNING Carelessness while installing differential case assembly may result in injury. 30.Install bearing caps. Ensure correct fitment of caps by matching letters on caps and carrier on either side. Use torque bearing cap screws to specification.
RkJQdWJsaXNoZXIy MTIwNTUz