FRONT SUSPENSION 19 FRONT SUSPENSION E. BUMP STOPPER REMOVAL Bump stopper is mounted on the frame. Loosen and remove the bump stopper and separate the same from the frame. Follow the same procedure for other stopper also. FITMENT For fitment tighten the stopper assembly on the frame. NOTE Make sure that the specified torque is always maintained. Refer tightening torque table. Check condition of bump stopper for any cracks chipping, wear and tear before fitment. 5.1.3 OVERHAULING 5.1.3.1 PRECAUTIONS 1. Since all suspension fasteners are critical in suspension attachments with regard to performance and safety of vehicle, these must be replaced with one of the same part number in case of replacement. 2. Torque values must be maintained as specified during reassembly for proper retention of the parts. The replacement parts should be of the same quality as of the designed parts. 3. Damaged parts should be replaced only with new parts. Welding, straightening or any other form of repairing should not be attempted. 4. Lower arm bushes are to be aligned properly while fitment. 5. Care should be taken while handling spring loaded suspension components.
RkJQdWJsaXNoZXIy MTIwNTUz