ENGINE 136 6. Remove the rear mounting bolts (1), mounted from below and lower the tank carefully. 7. Slightly lower the tank assembly and disconnect electrical connectors and fuel lines. INSPECTION • Check all hoses and pipes connected to fuel tank for leaks, loose connections, deterioration or damage. Replace if necessary. • Check fuel pump and fuel level gauge gaskets for leaks, cracks etc. Replace if necessary. • Visually inspect fuel tank for leaks and damage. Replace if necessary. • Ensure that the rubber grommet is fitted during refitment of fuel tank. FITMENT Follow the reverse order of removal for fitment. D. TANK UNIT REMOVAL CAUTION • Unless replacement is necessary, Tank unit and fuel level sensor should not be removed from the tank since the rubber parts i.e. gasket, seals etc. may harden when exposed to air and light. • Never apply an excessive force to the tank unit nipple or lead wire. This may result in bent or poor contact. 1. Remove fuel tank assembly (for procedures refer fuel tank removal). 2. Disconnect the connector (1) and then disconnect the fuel lines i.e. Delivery line (3) and the Return Line (2). 3. Loosen and remove the 6 mounting nuts.
RkJQdWJsaXNoZXIy MTIwNTUz