ENGINE 116 D. THERMOSTAT REMOVAL 1. Drain the coolant. (Refer “Coolant Replacement Procedure in this section). 2. Access the thermostat from top by removing air filter assembly. 3. Remove the spring band clip (1) and disconnect the hose (2). 4. Remove the cover mounting nuts (3). 5. Remove the cover (1) and thermostat (3) from the housing (4). Replace the gasket (2) while refit- ting. FITMENT For fitment follow the reverse order of removal. Tighten fasteners to the recommended torque. Thermostat cover mounting: M8 nut– (2.2 + 0.3 Kg- m)
RkJQdWJsaXNoZXIy MTIwNTUz