BODY 80 4. Loosen and remove the cross flanged screw at the front. 5. Loosen and remove mounting screws (5 Nos.) from bottom side as shown below. 6. Open both door and pull out the sill finisher carefully and separate it from the vehicle. NOTE Before assembly check the condition of plastic clips if found damaged replace with new one at the time of assembly. FITMENT For fitment follow reverse procedure of removal. 9.2.46 REAR WHEEL ARCH LINER REMOVAL 1. Loosen and remove 2 mountings from bolt side and 3 mounting facing tire side and take out rear mud flap 2. Remove mounting clips (1).(3 Nos.) and mounting screws (2) (2 Nos.) and take out the right hand side liner. 3. Remove mounting clips (1).(2 Nos.) mounting screws (2) (2 Nos.) and take out the left hand side rear liner FITMENT For fitment follow reverse procedure of removal. NOTE Before assembly check the condition of plastic clips if found damaged replace with new one.
RkJQdWJsaXNoZXIy MTIwNTUz