BODY 79 BODY 9.2.44 FRONT WHEEL ARCH COVER REMOVAL 1. Remove the plastic nut (1)(2 Nos.) and clips (2)(4 Nos.) and one mounting screw(3).then take out the front mud guard 2. Remove mounting clips (1).(8 Nos.) then plastic nut (2) (2 Nos.) and one screw (3) and take out the front wheel cover FITMENT For fitment follow reverse procedure of removal. NOTE Properly locate the front wheel arch cover on the fender. 9.2.45 SILL FINISHER REMOVAL 1. Remove side foot step (For procedure refer side foot step removal procedure in this section) 2. Pull out front fender side moulding assembly. 3. Loosen and remove one mounting from below and then 3 mounting facing the tire side and take out mud flap.
RkJQdWJsaXNoZXIy MTIwNTUz