BODY 67 BODY ROOF GRAB HANDLE NOTE The procedure given for removal of grab handle is applicable for all three grab handles in the vehicle. REMOVAL 1. Pull out the rubber cap to access the mounting bolts them loosen and remove two bolts and take out the assembly. FITMENT For Fitment follow reverse procedure of removal. “D” PILLAR TRIM GRAB HANDLE 1. Pull out the cap to access the mounting bolts of grab handle then Loosen and remove two mounting bolts to remove grab handle FITMENT For Fitment follow reverse procedure of removal. 9.2.34 SUNVISOR REMOVAL 1. Pullout the sunvisor from hook for easy access to mounting bolts. 2. Pull out the cap and loosen and remove two mounting screws and remove the sunvisor assembly. 3. Remove electrical connections and take out sunvisor assembly. 4. If required pull out the flap and take out the hook by removing two mounting screws. FITMENT For Fitment follow reverse procedure of removal. NOTE Procedure given for sunvisor removal is similar for both sides.
RkJQdWJsaXNoZXIy MTIwNTUz