BODY 66 9.2.32 REAR QUARTER TRIM REMOVAL 1. Remove third row seat (For procedure refer third row seat removal procedure in this section.) 2. Loosen and remove the hanging bracket of third row seat and take out the same. 3. Tilt second row seat to access the trim end. 4. Remove two mounting bolts of second row seat belt. 5. Remove “C” pillar trim (For procedure refer “C” pillar removal procedure in this section.) 6. Remove “D” pillar trim (For procedure refer “D” pillar removal procedure in this section.) 7. Pull out the luggage scuff plate cap to access the mounting screw then loosen and remove the screw and pry out the luggage scuff plate. 8. Pull out the rear quarter trim and separate it from vehicle. NOTE While pulling rear quarter trim, care should be taken such that tree clip don’t get damage. Refer exploded view for location of tree clips. FITMENT For fitment follow the reverse procedure of removal. NOTE Before assembly check all trim clips and if found damage replace with new one. 9.2.33 GRAB HANDLES
RkJQdWJsaXNoZXIy MTIwNTUz