ENGINE 47 14.Loosen and remove the cap connector (1) of the HP line at the common rail end and HP pipe mounting bolt (2). 15.Loosen and remove the cap connector of the HP line at the HP pump end and take out the same. NOTE: • After removing the HP pipes cover the opening with suitable caps. • Don’t use the HP lines once removed Use new one at the time of assembly. 16.Loosen the bolts (1) and (2) and remove the dipstick pipe. 17.Remove the intake adaptor pipe with the flange pipe. 18.Remove the coolant pipe by removing the bolt (1) from intake manifold and bolt (2) connecting it to cylinder head. 19.Loosen the oil mist separator hose clips from air intake pipe and cylinder head cover and remove the hose pipes.
RkJQdWJsaXNoZXIy MTIwNTUz